Saturday, December 19, 2009

Finished Phil Campbells New Guitar

I have finally finished Phil's new Strat:


The guitar is built as a twin to the Series 2 Les Paul Style that we built for him earlier this year - its translucent white over Flame Maple with Gold Hardware.

Here are the specs:

Body: 1 Piece Ash with Flame Maple top. Routed for H/S/S

Neck: High Quality Flame Maple with Premium Rosewood Fretboard 22 Frets (medium Jumbo), 16" radius - "Spade" symbol fret markers in Abalone with "Wanker" at the 12th fret. Hand carved bone nut (0.023" to 0.018" E to E) 42.6mm at the nut / 52mm at the 12th fret. Very slim neck profile (20mm at 12th fret) - soft shoulders with a fairly "flat" back - think FAST. Vintage Pin-up decal on the headstock, finished in high gloss Nitro with Danish Oil finish on the back of the neck.

Hardware: EMG 81/S/S with 1 volume and 1 tone (ceramic) Callaham Vintage S bridge and trem block (blocked off) - no trem claw or springs - the trem cavity has 2 9v batteries for 18v mod to the EMG circuitry) Hardware has been selectivly 24 carat gold plated for a Gold / Nickel look. Hand made Gold Mirror pickguard and matching back plate - Vintage split post tuners again selectivly plated in gold. And finally a nice Welsh Flag button.

The guitars neck is set with a very very small amount of relief, Earnie Ball Super Slinky 10's with the action at 0.055 at the 12th fret on the Bass E going to 0.045 on the trebel E.

This had turned out to be yet another sweet guitar - I actually took a break yesterday and just played it for the sheer enjoyment it sounded and played that good. Phil is in Moscow today for the last gig of the 2009 Motorizer tour - we will hook up over Xmas and the New Year - I will try and get some pics and video of him with the guitar.

I can build this same guitar for around £850 - Fender Custom Shop quality at a fraction of the price.

Click on the pictures for bigger versions:



Tuesday, December 15, 2009

Phil Campbells new Strat Build

I have been working on the neck again for the new Stratocaster I am building for Phil Campbell of Motorhead - here are a few pics (click on them for a bigger version):

Headstock with decal & Logo - Lots of Nitro Clear - hand flatted between coats etc:


Back of the neck - high quality Flame Maple


12th Fret Inlay:


"Ace" Fret Markers

Saturday, December 12, 2009

Guitar for Horton Heat

Working on a Guitar for the Rev. Horton Heat - check out this website for more info if you are not familiar with them: http://www.reverendhortonheat.com/ - more info will be up shortly.








Tuesday, December 8, 2009

Phil Campbells Strat Build

I have been building Phil Campbell of Motorhead a Strat for the past few weeks - its just about done. Today I applied the headstock decals and took a quick picture (click on it to see it bigger)



I will post some pictures and more information later this week once it's complete. I can build this same Strat for £750 - set up exactly as this one.

Tuesday, December 1, 2009

Yamaha, Kawasaki & Ducati Stratocasters

Just finishing up on a few Motorbike themed Strats.

Made up from various off the shelf Fender and non-Fender parts - generic Strat pickups. Fender USA necks with serial numbers. £475 each - upgrade the pickups etc at your option - call or email for upgrade pricing. Premium Paintwork by "Ace of Sprays"